| 序号 |
论文题目 |
刊名及发表情况 |
三大 检索 |
| 1 |
Analysis of the light absorption enhancement in polymer solar cell with TiO2optical spacer |
Acta Phys. Sin.,2012,61(20):207203 |
SCI |
| 2 |
The light absorption enhancement in polymer solar cells with periodic nano-structures gratings |
Acta Phys. Sin.,2012,61(20):207204 |
SCI |
| 3 |
Numerical Analysis of Thermally-induced Residual Stresses in Beryllium caused by BeO |
Advanced Materials Research, 2012,Vols.476-478:2510-2514 |
EI |
| 4 |
Experimental Study on Engineering Mechanical Properties of Beryllium |
Applied Mechanics and Materials,2012,Vols.166-169:2962-2965 |
EI |
| 5 |
Numerical Analysis on Cooling Process of Monocrystal Silicon Rod Manufactured with Czochralski Method |
Applied Mechanics and Materials,2012,Vols.217-219:1425-1428 |
EI |
| 6 |
Ferroelectric-field-effect-enhancedelectroresistance in metal/ferroelectric/semiconductor tunnel junctions |
NatureMaterials, 2013, 12:617-621 |
SCI |
| 7 |
Study of the impact toughness Experiment of SiC/Al FGM and Numerical Simulation |
Applied Mechanics and Materials,2013,Vols.268-270:127-133 |
EI |
| 8 |
Study of the impact toughness Experiment of SiC/Al FGM |
Advanced Materials Research, 2013,Vols.602-604:2017-2020 |
EI |
| 9 |
Large scale synthesized sulphonated reduced graphene oxide: a high performance material for electrochemical capacitors |
RSC Advances, 2013,3,35:14954-14959 |
SCI |
| 10 |
The capacitive deionization behaviour of a carbon nanotube and reduced graphene oxide composite |
Journal of Materials Chemistry A,2013,1,21:6335-6341 |
SCI |
| 11 |
Fabrication and Characterization of Ni-Mn-Si-Al-O NTC thermistor and its application as temperature wire sensor |
Functional Materials Letters,2013,Volume 6,Issue04 |
SCI |
| 12 |
The light absorption enhancement in polymer solar cells with nano-Ag |
Acta Phys. Sin.,2013,62(19):197202-1 |
SCI |
| 13 |
Influence of Pressure of Electron Gas on Elastic Property of Metal |
Advanced Materials Research, 2013,Vols.602-604:857-860 |
EI |
| 14 |
Model Analysis on Particle Size Distribution of Beryllium Powder |
Applied Mechanics and Materials,2013,Vols.268-270:336-339 |
EI |
| 15 |
SAPS法沉积Ni-Mn-Mg-Al-O系负温度系数热敏厚膜及性能研究 |
电子元件与材料,2013,32(5):26-29 |
核心 |
| 16 |
采用石墨电极制备多孔硅工艺研究 |
硅酸盐学报,2013,32(7) :1394-1396 |
核心 |
| 17 |
导流筒对200mm直拉单晶硅氧含量的影响研究 |
硅酸盐学报,2013,32(9) :1921-1926 |
核心 |
| 18 |
冶金级硅水热酸洗提纯研究 |
河北工业科技,2013,30(1):6-9 |
核心 |
| 19 |
Research Progress on Fracture Behaviors of powder Metallurgy Polycrystalline Beryllium at Room Temperature |
材料导报A,2013,27(8):94-97 |
核心 |
| 20 |
A high charge efficiency electrode by self- assembling sulphonated reduced graphene oxide onto carbon fiber: towards enhanced capacitive deionization |
Journal of Materials Chemistry A,2014,2,10:3484-3491 |
SCI |
| 21 |
Large scale synthesis of TiO2–carbon nanocomposites using cheap rawmaterials as anode for lithium ion batteries |
Journal of Alloys and Compounds2014,615:1052-1055 |
SCI |
| 22 |
Visible-light assisted reduction of graphene oxide and its potential applications in water treatment |
Functional Materials Letters, 2014,Volume 07, Issue02 |
SCI |
| 23 |
Internal Mechanism Analysis of Modeling on Particles Size Distribution Characteristics of Impact Attrition Beryllium Powders |
Rare Metal Materials and Engineering, 2014,43(3):0567-0569 |
SCI |
| 24 |
Influence of Argon FlowＲate on the Solid /Liquid Interface，Thermal Stressand Oxygen Concentration in the 400 mm CZ Silicon with a Magnetic Field |
JournalofSyntheticCrystals, 2014,43(5):1193-1211 |
EI |
| 25 |
Numerical Analysis of Micro Elastic Mismatch of Polycrystalline Beryllium |
稀有金属,2014,39(5): 764-768 |
EI |
| 26 |
A newwayforsynthesizingSnO2nanosheets |
Materials Letters138(2015)45–47 |
SCI |
| 27 |
Fabrication and Electrochemical Performance of Nitrogen-doped Graphene Synthesized by Hydrothermal Method |
Materials Science Forum Vol. 804 (2015) pp35-38 |
EI |
| 28 |
Density functional theory study of the interaction of nitric oxide with 3d transition metal dimers |
Materials Science Forum Vol. 804 (2015) pp 145-148 |
EI |
| 29 |
The study of capacitive deionization behavior of a carbonnanotube electrode from the perspective of chargeefficiency |
Water Science and Technology, 2015, 71(1): 83-88 |
SCI |
| 30 |
Sulfonated Reduced Graphene Oxide: A HighPerformance Anode Material for Lithium Ion Battery |
Nano, 2015, 10(4): 1550054-7 |
SCI |
| 31 |
An insight into the improved capacitive deionization performance of activated carbon treated by sulfuric acid |
Electrochimica Acta, 2015, 176: 755-762 |
SCI |
| 32 |
Influence of Crucible Rotation on the Oxygen Boundary Layer in the Growth of EI 300mm Single Crystal Silicon |
JournalofSyntheticCrystals, 2015,44:200-204 |
EI |
| 33 |
Inflence of Graphite Felt Structure on the Hot Zone and Oxygen Concentration in the Growth of 200mm Single Crystal Silicon |
JournalofSyntheticCrystals, 2015,44(3):1-5 |
EI |
| 34 |
Study on the Fabrication and Properties of Glass Fiber Aligned Reinfored NanoSiO2Thermal Insulating Materials |
JournalofSyntheticCrystals, 2015,4:1-5 |
EI |
| 35 |
Inflence of Heat Insulation Felt Structure on the Thermal Field and Oxygen Content in the Growth ofФ200mmSingle Crystal Silicon |
JournalofSyntheticCrystals, 2015,44:200-204 |
EI |
| 36 |
Study of Convective Behavior of Silicon Melt for Solar-Grade Casting Quasi-Single Silicon Prepared by Inductive Melting Solution |
JournalofSyntheticCrystals, 2015,7:1941-1945 |
EI |
| 37 |
Inflence of Pulling Rate on Solid-liquid Interface，Oxygen Concentration and V/Gn in the Casting Quasi-single silicon Growth |
硅酸盐通报 2015,9(34)：2471-2475 |
核心 |
| 38 |
Cationic Distribution and Electrical Properties of Ni0.6Mn2Si0.4-xAlxO4(0≤x≤0.04) NTC Thermistor |
Materials Science Forum Vol.868(2016) pp79-83 |
EI |
| 39 |
Influence of Heater Diameter on the Temperature Distribution and MeltConvection in a Directional Solidification System for Mono-Like SiliconGrowth |
Materials Science Forum Vol.868(2016) pp100-104 |
EI |
| 40 |
Energy Consumption in Batch-Mode Capacitive Deionization |
Materials Science Forum Vol.868(2016) pp43-49 |
EI |
| 41 |
Hydrothermally synthesized graphene and Fe3O4nanocomposites for high performance capacitivedeionization |
RSC Advances 已接受 |
SCI |
| 42 |
Mechanical and optical properties of transparent alumina obtained by rapidvacuum sintering |
Ceramics International 已接受 |
SCI |
| 43 |
Improved capacitive deionization performance by coupling TiO2 nanoparticles with carbon nanotubes |
Separation and Purification Technology,171(2016)：93-100 |
SCI |
| 44 |
On the origin of enhanced electrochemical behavior of oxidized activatedcarbon |
Chemical Physics, 475(2016)：54-60 |
SCI |
| 45 |
Ultrahigh Performance of NovelCapacitive Deionization Electrodesbased on A Three-DimensionalGraphene Architecture withNanopores |
Scientific Reports 已接受 |
SCI |
| 46 |
Uniform carbon hollow sphere for highly efficient electrosorption |
J Porous Mater 已接受 |
SCI |
| 47 |
Preparation of silver nanopowders by a controlled wet-chemical synthesis |
MaterialsLetters173(2016)39–42 |
SCI |
| 48 |
高温高压条件下铍弹性性能数值模拟 |
稀有金属,2016,40(10):1002-1007 |
EI |
| 49 |
多晶硅铸锭内嵌杂质引发热应力的数值分析 |
人工晶体学报,2016,45(4):923-928 |
核心 |
| 50 |
反射光谱拟合法确定聚合物半导体薄膜光学常数和厚度 |
激光与光电子学进展 |
核心 |
| 51 |
轧制温度对Ni灢9.3%W合金基带形变组织和织构的影响 |
兰州理工大学学报2016,2(42)：13-16 |
核心 |
